<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=445056146107513&amp;ev=PageView&amp;noscript=1">

Hagerman Connection Blog

AutoCAD Plant 3D - Sloped Piping

Posted by Rick France on Jan 28, 2022 11:06:38 AM

Sloped piping is used in gravity-based piping to avoid accumulating substances in the pipeline. It is commonly used in various types of drainage systems or other piping runs that do not have a pumping system or pressurized components. The pipe is sloped downwards away from the source and toward the destination so that the substance flows from the high to the low point due to the force of gravity. In AutoCAD® Plant 3D, you can set the rise and run for the slope when routing pipe or modify the pipe slope in existing runs.

This webcast highlights the process for creating Sloped Piping within a Plant 3D project.

Topics include:

  • Rise and Run
  • Drawing Sloped Pipe
  • Horizontal Runs
  • Vertical Runs
  • Existing Equipment Runs
  • Pipe Slope Editing on Existing Pipe
  • Tee Time
  • Adding and Moving Branches
  • Vertical Connections
  • Slope & Offset Tolerance

 

 

Topics: Tips and Tricks, Plant

Back to home